Our Boards

DOWNHILL:

Carbon Fiber Topmount

38″ Carbon Fiber Topmount constructed of 3 1/8″ plys of baltic birch and a layer of uni directional carbon fiber epoxied to the bottom. This board has a deep concave that really locks your feet in. This downhill machine is stiff and extremely light.

Dimensions:

38″ x 10″

Sarcouphagus

This topmount speed board is designed with performance in mind. It is constructed of 5 1/8″ plys of baltic birch pressed into a deep concave resulting in a rock solid board. The small cutouts in the front are designed for hand placement during frontside cornering. This board has the options of wheels wells and flush mounting, neither of which is shown for a small extra charge.

Dimensions:

40″ x 10″

Spoon

This 37.5″ downhill machine is constructed of 5 1/8″ plys of baltic birch pressed with 3/4″ of concave. It is rock solid and is a blast to ride. The deep wheel wells reduce wheel bite and the hips allow for easy footbraking. The hips also provide gas pedals which help in cornering purposes.

Dimensions:

37.5″ x 10″(front) 8″(middle) 9″(back)

Pizazz

This top mount speed board is one of the funkiest that has come out of the shop at Night Skateboards. This sleek racing machine features ‘Pizazz’ elements on the rails that act as hand grips for cornering, both toe side and heel side. The model pictured has a custom wheelbases of 26″ and 27″, but the standard wheelbases are 31″ and 32″.

Dimensions:

40″x10″

FREERIDE:

Freeride

This 40″ board is designed to be the ultimate freeride board. It is constructed of 4 1/8″ plys of baltic birch pressed into a steep concave. It features ” gas pedals” in all four corners of the board to help you push through a sharp hairpin or throw a massive stand up slide. This board has a nice poppy flex that also helps with slides and deep wheel wells to avoid wheel bite.

Dimensions:

40″ x 10″

Dropthrough Freeride

This board is the sister board of the Freeride. The waist and gas pedals on this deck were not change one bit, and the nose was altered to accommodate dropthrough mountings which lowers the boards center of gravity, making it easier to throw massive standup slides and making it easier to slide in general.

Dimensions:

40″ x 10″

All-in-One

The name of this board says it all… it is a board that is built of ANYTHING! This double kicktailed, cambered, concaved board can handle any task that you throw its way, whether it be bombing hills, sliding, dancing,  ripping the local park, carving down the local garage, or taking a nice ldp sesh around the lake. This board also features our progressive flex, which allows for the board to be fairly stiff when you want it to, and then really flexy down and come to life when you need it to do so. This is because of our unique vlam construction of poplar and purpleheart backed with a sheet of glass and then sandwitched between two sheets of fiberglass. This allows for an extremly fun board that can conquer any situation with ease.

Dimensions:

42″ x 10″

CRUISING AND CARVING:

Pintail Carver

This 45″ carver is constructed of 4 1/8″ layers of baltic birch and then fiberglassed on both sides to give the board a very nice flex. This board comes standard with wheel wells to avoid wheel bite.

Dimensions:

45″ x 9.5″

The Flatworm

This 48″ cruiser/carver is designed for the “heavier” rider. It is constructed of 5 1/8″ plys of baltic birch and has a massive 2″ of camber. The wheel cutouts in the front allow larger wheels to be used while avoiding wheel bite.

Dimensions:

48″ x 10″

The Phish

This 48″ long board a perfect all around board. It has a nice mellow concave of a half inch and a sweet kick tail. This board does everything from dancing to bombing. It is constructed of 4 1/8″ sheets of baltic birch pressed together using Titebond III wood glue. This board is such a fun board and, as always, comes with a custom stain, paint, or veneer.

Dimensions:

48″ x 10″

Dropthrough Carver

This board is a 43″ of cambered concaved carving machiene. It is consructed of 4 1/8″ plys of baltic birch. The dropthroughs let this board be lower to the ground making it easier to push. The dropthroughs also allow for this board to be stable at speeds if that is desired. Topped of with our super grippy clear grip this board is a beast.

Dimensions:

43″ x 10″

MINIS:

V-Lam Mini

This old school mini is constructed using a vertical lamination technique using any hardwood. This allows for the striped look. This particular board is constructed of Purpleheart, Yellowheart, and Basswood, but any hardwood can be used. This very shiny board is topped of with a clear grip made of “TreadTex” and polycrylic.

Dimensions:

32″ x 8″

Rocker Convex Vlam Mini

This nice little board is a sweet bare foot cruiser. The rocker and the convex gives it a very comfy old school feel. It is constructed using a trilam method which consists of making a vlam and then baking it with  a sheet of 1/8″ BB in a traditional press to hold its shape. It is then topped off with a clear tread tex grip. Very fun board.

Dimensions:

32″ x 8″

Backpack Board

This little sucker is an awesome deck. Not only is it small enough to fit into your backpack, but it is large enough to ride comfortably without feeling cramped. This deck is optional with either camber or rocker, depending on what you would prefer, and concave. This board is great for taking to school as it can easily fit in your locker as well.

Dimensions:

24″ x 8″

SLALOM:

"The Fatty" Slalom Board

This cone killing machine is the signature model of team rider Jake Snyder. It is constructed of 4 1/8″ sheets of baltic birch. It has a slight camber of 1/2″ and 1/2″ of concave. The wide shape allows for good foot placement and the deep wheel wells eliminate wheel bite. This board has a nice poppy flex that is not too much, but not too little. It allows you to fly through cones at breathtaking precision. The multiple wheel base options makes this board a very versatile one.

Dimensions:

32″ x 9″

If you are interested in any one of these boards, please contact me at

everettmccord@gmail.com

There are always more boards on the way.

Soon to come:

Foam Core topmount speedboard, Double Drop Freeride board, and Night Skateboards CNC presicion truck hangars.